As the angular position sensor is a main sensor to measure an accurate position and direction, it plays an important role in various applications such as robotic controller, camera and industrial machines. Recently, lots of angular position sensors such as simple resistive potentiometer, capacitive potentiometer, optical sensor and magnetic sensor are described in several literatures. This paper has described a simple absolute rotary angular sensor with a nonlinear transparent disc. This sensor consists of five elements such as light-source, a shaft coupled nonlinear transparent optical disc, lens, a pair of light dependent resistor (LDR) and a signal processing circuit. This absolute rotary angular sensor is one of non-contact potentiometer based on characteristic of resistance via irradiance and has an advantage to fabricate easily as disc is made with fiber glass and a self-adhesive tape of which transparency is nonlinearly changed in a range of 0-360°. Also this sensor has a good linearity of R2 = 0.99999, a good repeatability of maximum characteristic drift around ±0.1° and measurement error below ±0.5°. And measurement stability is ±0.1° within its full operating range from 0° to 360°. The proposed disc assembly and overall results can be helpful to design absolute rotary angular sensor for performance improvement of it. It seems that the proposed method has important practical significance for the development of optical absolute rotary angular sensor.
Published in | International Journal of Sensors and Sensor Networks (Volume 10, Issue 2) |
DOI | 10.11648/j.ijssn.20221002.12 |
Page(s) | 25-32 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2022. Published by Science Publishing Group |
Potentiometer, Rotary Angular Sensor, Transparency, Brightness, Encoder
[1] | W. J. Fleming, Overview of automotive sensors, IEEE Sens. J. 1 (4) (2001) 296–308. |
[2] | K. Nakano, T. Takahashi, S. Kawahito, A CMOS rotary encoder using magnetic sensor array, IEEE Sens. J. 5 (October) (2005) 889–894. |
[3] | D. Maschera, A. Simoni, M. Gottardi, L. Conzo, S. Gregori, V. Liberali, G. Torelli, An automatically compensated readout channel for rotary encoder systems, IEEE Trans. Instrum. Meas. 50 (December) (2001) 1801–1807. |
[4] | T. Reininger, F. Welker, M. von Zeppelin, Sensors in position control applications for industrial automation, Sensors and Actuators A: Physical 129 (2006) 270–274. |
[5] | X. Zhang, L. Kang, W. Diao, The principle of the potentiometer and its applications in the vehicle steering, in: IEEE International Conference on Vehicular Electronics and Safety, Xi’an, China, 2005, pp. 20–24. |
[6] | M. Gasulla, Xiujun Li, G. C. M. Meijer, L. van der Ham, J. W. Spronck, A contactless capacitive angular-position sensor, IEEE Sens. J. 3 (October (5)) (2003) 607–614, http://dx.doi.org/10.1109/JSEN.2003.817182. |
[7] | R. D. Evans, N. M. Jokerst, R. B. Fair, Integrated optical sensor in a digital microfluidic platform, IEEE Sensors Journal 5 (2008) 628–635. |
[8] | E. Hristoforou, P. D. Dimitropoulos, J. Petrou, A new position sensor based on the MDL technique, Sensors and Actuators A: Physical 132 (2006) 112–121. |
[9] | G. Rieger, K. Ludwig, J. Hauch, W. Clemens, GMR sensor for contactless position detection, Sensors and Actuators A: Physical 91 (2001) 7–11. |
[10] | B. Tan, D. J. Mapps, P. Robinson, G. Pan, Demonstration of a magnetic angular position sensor with ultra-high resolution and accuracy, Sensors and Actuators A: Physical 81 (2000) 332–335. |
[11] | Handbook of Modern Sensors, 2nd ed., Springer-Verlag, Berlin, 1996. |
[12] | D. Zheng, S. Zhang, S. Wang, C. Hu, X. Zhao, A capacitive rotary encoder based on quadrature modulation and demodulation, IEEE Trans. Instrum. Meas. 64 (1) (2015) 143–153, http://dx.doi.org/10.1109/TIM.2014.2328456. |
[13] | Nikhil Gaurav, Sagarika Pal, Design, Development and testing of a semicircular type capacitive angular position sensor, Sens. Transducers J. 129 (June (6)) (2011) 16–23. |
[14] | H. Chiriac, C. S. Marinescu, New position sensor based on ultra-acoustic standing waves in FeSiB amorphous wires, Sensors and Actuators A: Physical 81 (2000) 174–175. |
[15] | Z. Zhang, F. Ni, Y. Dong, M. Jin, H. Liu, A novel absolute angular position sensor based on electromagnetism, Sens. Actuators A Phys. 194 (2013) 196–203. http://dx.doi.org/10.1016/j.sna.2013.01.040 |
[16] | Shuanghui Hao, Yong Liu, Minghui Hao, Study on a novel absolute magnetic encoder, in: Proceedings of the 2008 IEEE International Conference on Robotics and Biomimetics Bangkok, Thailand, February, 2009, pp. 21–26. |
[17] | Jovan S. Baji´c, Dragan Z. Stupar, Bojan M. Daki´c, Miloˇs B. ˇZivanov, László F. Nagy, An absolute rotary position sensor based on cylindrical coordinate color space transformation, Sensors and Actuators A 213 (2014) 27–34, http://dx.doi.org/10.1016/j.sna.2014.03.036 |
[18] | S. Dasa, T. Subhra Sarkar, B. Chakraborty, H. Sekhar Dutta, Study on array of photo-detector based absolute rotary encoder, Sensors and Actuators A 246 (2016), 114–122, http://dx.doi.org/10.1016/j.sna.2016.05.026 |
[19] | Light Dependent Resistor Datasheet, RS Components, Corby, Northants (1997). |
[20] | Springer Handbook of Lasers and Optics, Springer-Verlag, Berlin, 2007. |
[21] | R. C. Gonzalez, R. E. Woods, Digital Image Processing, 2nd ed., Prentice Hall, 2008. |
[22] | Datasheet of High Intensity LED TLDR54TELE00, TEMIC TELEFUNKEN microelectronic GmbH, P. O. B. 3535, D-74025 Heilbronn, Germany, 1995. |
[23] | Goran S. Miljkovic, Dragan B. Denic, Redundant and Flexible Pseudorandom Optical Rotary Encoder, ELEKTRONIKA IR ELEKTROTECHNIKA, ISSN 1392-1215, VOL. 26, NO. 6, 2020, 10–16, http://dx.doi.org/10.5755/j01.eie.26.6.25476 |
[24] | L. Iafolla, M. Filipozzi, S. Freund, A. Zam, G. Rauter, P. C. Cattin, Proof of concept of a novel absolute rotary encoder, Sensors and Actuators A 312 (2020) 1–11, https://doi.org/10.1016/j.sna.2020.112100 |
APA Style
Nam Chol Yu, Myong Jin Jo, Chol Sun Kim. (2022). Improving of Characteristics of Rotary Angular Sensor Using Nonlinear Transparent Disc. International Journal of Sensors and Sensor Networks, 10(2), 25-32. https://doi.org/10.11648/j.ijssn.20221002.12
ACS Style
Nam Chol Yu; Myong Jin Jo; Chol Sun Kim. Improving of Characteristics of Rotary Angular Sensor Using Nonlinear Transparent Disc. Int. J. Sens. Sens. Netw. 2022, 10(2), 25-32. doi: 10.11648/j.ijssn.20221002.12
@article{10.11648/j.ijssn.20221002.12, author = {Nam Chol Yu and Myong Jin Jo and Chol Sun Kim}, title = {Improving of Characteristics of Rotary Angular Sensor Using Nonlinear Transparent Disc}, journal = {International Journal of Sensors and Sensor Networks}, volume = {10}, number = {2}, pages = {25-32}, doi = {10.11648/j.ijssn.20221002.12}, url = {https://doi.org/10.11648/j.ijssn.20221002.12}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijssn.20221002.12}, abstract = {As the angular position sensor is a main sensor to measure an accurate position and direction, it plays an important role in various applications such as robotic controller, camera and industrial machines. Recently, lots of angular position sensors such as simple resistive potentiometer, capacitive potentiometer, optical sensor and magnetic sensor are described in several literatures. This paper has described a simple absolute rotary angular sensor with a nonlinear transparent disc. This sensor consists of five elements such as light-source, a shaft coupled nonlinear transparent optical disc, lens, a pair of light dependent resistor (LDR) and a signal processing circuit. This absolute rotary angular sensor is one of non-contact potentiometer based on characteristic of resistance via irradiance and has an advantage to fabricate easily as disc is made with fiber glass and a self-adhesive tape of which transparency is nonlinearly changed in a range of 0-360°. Also this sensor has a good linearity of R2 = 0.99999, a good repeatability of maximum characteristic drift around ±0.1° and measurement error below ±0.5°. And measurement stability is ±0.1° within its full operating range from 0° to 360°. The proposed disc assembly and overall results can be helpful to design absolute rotary angular sensor for performance improvement of it. It seems that the proposed method has important practical significance for the development of optical absolute rotary angular sensor.}, year = {2022} }
TY - JOUR T1 - Improving of Characteristics of Rotary Angular Sensor Using Nonlinear Transparent Disc AU - Nam Chol Yu AU - Myong Jin Jo AU - Chol Sun Kim Y1 - 2022/09/28 PY - 2022 N1 - https://doi.org/10.11648/j.ijssn.20221002.12 DO - 10.11648/j.ijssn.20221002.12 T2 - International Journal of Sensors and Sensor Networks JF - International Journal of Sensors and Sensor Networks JO - International Journal of Sensors and Sensor Networks SP - 25 EP - 32 PB - Science Publishing Group SN - 2329-1788 UR - https://doi.org/10.11648/j.ijssn.20221002.12 AB - As the angular position sensor is a main sensor to measure an accurate position and direction, it plays an important role in various applications such as robotic controller, camera and industrial machines. Recently, lots of angular position sensors such as simple resistive potentiometer, capacitive potentiometer, optical sensor and magnetic sensor are described in several literatures. This paper has described a simple absolute rotary angular sensor with a nonlinear transparent disc. This sensor consists of five elements such as light-source, a shaft coupled nonlinear transparent optical disc, lens, a pair of light dependent resistor (LDR) and a signal processing circuit. This absolute rotary angular sensor is one of non-contact potentiometer based on characteristic of resistance via irradiance and has an advantage to fabricate easily as disc is made with fiber glass and a self-adhesive tape of which transparency is nonlinearly changed in a range of 0-360°. Also this sensor has a good linearity of R2 = 0.99999, a good repeatability of maximum characteristic drift around ±0.1° and measurement error below ±0.5°. And measurement stability is ±0.1° within its full operating range from 0° to 360°. The proposed disc assembly and overall results can be helpful to design absolute rotary angular sensor for performance improvement of it. It seems that the proposed method has important practical significance for the development of optical absolute rotary angular sensor. VL - 10 IS - 2 ER -