Several materials have been developed and used to remove Chromate (VI) from industrial wastewater before discharge into the environment because of its toxicity and lethality. In this study, low-cost adsorbents (rice husk ash (RHA) and silica (RHS)) were prepared from rice husks purchased locally from a rice mill industry and characterised. While the crystallinity and mineralogy of the adsorbents were analysed using powdered XRD crystallography, analysis of the physico-chemical properties was performed using standard procedures. Elemental analysis (CHN) was done using Perkin Elmer CHN elemental analyser and FTIR Spectrometer was used to determine the functional groups on the surface of the adsorbents at room temperature. The prepared samples were used as adsorbents for the removal of chromate (VI) ion in a batch sorption process with reaction conditions vis–a-viz adsorbent dosage = 0.5 g, adsorbate volume = 500 ml, adsorbate solution concentrations: 10-200 mg/l, time = 4 h, temperature = ambient temperature. The residual Cr (VI) concentration in the solution was analyzed spectrophotometrically at λ = 540 nm following the 1,5–diphenylcarbazide procedure. Results obtained for the characterisation of the adsorbents were similar and comparable with what obtained in literatures. Physico - chemical analysis revealed a high ash content of 89% and silica content of 95.83%. XRD analysis for the rice husk ash samples reflected the presence of cristobalite (SiO2) in amorphous form and a characteristics broad peak at 2θ angle = 26.5°. FTIR analysis revealed the presence of silanol groups (Si-OH), silicic acid (Si-O-Si-OH) in the ash and Si-O-Si and Si-O) in the silica. The results of effect of time-concentration experiments of chromium ion sorption by the adsorbents revealed that Cr (VI) ion sorption was both time and initial solution concentration dependent with over 80% removal achieved within the first 30 min of contact for both adsorbents as the initial chromate concentration was increased. Kinetic modeling of the process showed up for pseudo second order, hinting on chemisorption as the mechanism of interaction.
Published in | American Journal of BioScience (Volume 9, Issue 3) |
DOI | 10.11648/j.ajbio.20210903.11 |
Page(s) | 72-78 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2021. Published by Science Publishing Group |
Characterisation, Chromium, Cristobalite, Kinetics, Rice Husk, Ash, Silica
[1] | Kameda, T., Kondo E. and Yoshioka T. (2014). Preparation of Mg-Al layered double hydroxide doped with Fe2+ and its application to Cr (VI) removal. Sep. and Purif. Tech. 122: 12-16. |
[2] | Li, Y.; Gao, B.; Wu, T.; Sun, D.; Li, X.; Wang, B.; Lu, F. (2009). Hexavalent chromium removal from aqueous solution by adsorption on aluminum magnesium mixed hydroxide. Water Res. 43, 3067–3075. |
[3] | Mutongo F., Kuipa O., and Kuipa P. K. (2014). Removal of Cr (VI) from Aqueous Solutions Using Powder of Potato Peelings as a Low Cost Sorbent. Bioinorganic Chemistry and Applications 7 pages http://dx.doi.org/10.1155/2014/973153 |
[4] | Baral, S. S., Das, S. N., & Rath, P. (2006). Cr (VI) removal from aqueous solution by adsorption on treated sawdust. Biochemical Engineering Journal, 31 (3), 216–222. |
[5] | Karthikeyan, T., Rajgopal, S., & Miranda, L. R. (2005). Chromium (VI) adsorption from aqueous solution by Hevea brasiliensis sawdust activated carbon. Journal of Hazardous Materials, 124 (1–3), 192–199. |
[6] | Cimino, G., Passerini, A., & Toscano, G. (2000). Removal of toxic cations and Cr(VI) from aqueous solution by hazelnut shell. Water Research, 34 (11), 2955–2962. |
[7] | Dubey, S. P., & Gopal, K. (2007). Adsorption of chromium (VI) on low cost adsorbents derived from agricultural waste material: a comparative study. Journal of Hazardous Materials, 145 (3), 465–470. |
[8] | Wang, X. S.; Tang, Y. P.; Tao, S. R. (2008). Removal of Cr (VI) from aqueous solutions by the non-living biomass of alligator weed: Kinetics and equilibrium. Adsorption, 14 (6), 823–830. |
[9] | Shwetha, M. K.., Geethanjali H. M. and Chowdary K. (2014). A great opportunity in prospective management of rice husk. International Journal of Commerce and Business Management. 7 (1): 176-180. |
[10] | Yadav, J. P., and Singh, B. R. (2011). Study on comparison of boiler efficiency using husk and coal as fuel in rice mill. SAMRIDDHI-A Journal of Physical Sciences, Engineering and Technology. 2: 2229-7111. |
[11] | Lata, S., and Samadder, R. (2014). Removal of heavy metals using rice husk: a review. International Journal of Environmental Research and Development. 4: 165-170. |
[12] | Babaso, P. N. and Sharanagouda H. (2017). Rice Husk and Its Applications: Review International Journal of Current Microbiology and Applied Sciences. 6 (1): 1144-1156. |
[13] | Imyim, A., and Prapalimrungsi, E. (2010). Humic acids removal from water by aminopropyl functionalized rice husk ash. Journal of Hazardous Materials. 184 (1): 775-781. |
[14] | Sharma, P., Kaur, R., Chinnappan, B. and Chung, W. J. (2010). Removal of methylene blue from aqueous waste using rice husk and rice husk ash. Desalination 259 (1): 249-257. |
[15] | Malhotra, C., R. Patil, S. Kausley and Ahmad, D. (2013). Novel uses of rice-husk-ash (a natural silica-carbon matrix) in low-cost water purification applications. AIP Conference Proceeding. |
[16] | Nakbanpote, W., P. Thiravetyan and Kalambaheti, C. (2000). Preconcentration of gold by rice husk ash. Mining engineering. 13 (4): 391-400. |
[17] | Srivastava V. C., Prasad B., Mall I. D., Mahadevswamy M., and Mishra I. M. (2006). Adsorptive removal of phenol by baggasse fly ash and activated carbon: equilibrium, kinetic and thermodynamics. Colloids Surface A: Physicochem. Eng. Aspect 272: 89-104. |
[18] | Tarley, C. R. T. and Arruda, M. A. Z. (2004). Biosorption of heavy metals using rice milling by-products. Characterization and application for removal of metals from aqueous effluents. Chemosphere, 54, 987-995. |
[19] | Nakbanpote, W., Goodman, B. A. and Thiravetyan, P. (2007). Cooper adsorption on rice husk derived materials studied by EPR and FTIR. Colloids Surf., A. 304, 7-13. |
[20] | Geetha, D., Ananthiand, A. and Ramesh, P. S. (2019). Preparation and Characterization of Silica Material from Rice Husk Ash – An Economically Viable Method. J. of Pure and Applied Physics 4 (3): 20-27. |
[21] | Adelagun R. O. A. (2018). Adsorption of Tetracycline by a Tailor- made Adsorbent in Aqueous System. Open Access Journal of Chemistry (2) 4: 45-52. |
[22] | Ho Y. S., and McKay G. 1998. Pseudo second order model for sorption processes. Process Biochem. 34: 451-465. |
[23] | Wu F. C., Tseng, R. L., and Juang R. S. (2009). Initial behavior of intraparticle diffusion model used in the description of adsorption kinetics, Chem. Eng. J. 153: 1–8. |
APA Style
Adelagun Ruth Olubukola Ajoke. (2021). Low-cost Rice Husk Ash and Silica for Chromium Ion Sorption from Aqueous System: Characterisation and Kinetics. American Journal of BioScience, 9(3), 72-78. https://doi.org/10.11648/j.ajbio.20210903.11
ACS Style
Adelagun Ruth Olubukola Ajoke. Low-cost Rice Husk Ash and Silica for Chromium Ion Sorption from Aqueous System: Characterisation and Kinetics. Am. J. BioScience 2021, 9(3), 72-78. doi: 10.11648/j.ajbio.20210903.11
AMA Style
Adelagun Ruth Olubukola Ajoke. Low-cost Rice Husk Ash and Silica for Chromium Ion Sorption from Aqueous System: Characterisation and Kinetics. Am J BioScience. 2021;9(3):72-78. doi: 10.11648/j.ajbio.20210903.11
@article{10.11648/j.ajbio.20210903.11, author = {Adelagun Ruth Olubukola Ajoke}, title = {Low-cost Rice Husk Ash and Silica for Chromium Ion Sorption from Aqueous System: Characterisation and Kinetics}, journal = {American Journal of BioScience}, volume = {9}, number = {3}, pages = {72-78}, doi = {10.11648/j.ajbio.20210903.11}, url = {https://doi.org/10.11648/j.ajbio.20210903.11}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajbio.20210903.11}, abstract = {Several materials have been developed and used to remove Chromate (VI) from industrial wastewater before discharge into the environment because of its toxicity and lethality. In this study, low-cost adsorbents (rice husk ash (RHA) and silica (RHS)) were prepared from rice husks purchased locally from a rice mill industry and characterised. While the crystallinity and mineralogy of the adsorbents were analysed using powdered XRD crystallography, analysis of the physico-chemical properties was performed using standard procedures. Elemental analysis (CHN) was done using Perkin Elmer CHN elemental analyser and FTIR Spectrometer was used to determine the functional groups on the surface of the adsorbents at room temperature. The prepared samples were used as adsorbents for the removal of chromate (VI) ion in a batch sorption process with reaction conditions vis–a-viz adsorbent dosage = 0.5 g, adsorbate volume = 500 ml, adsorbate solution concentrations: 10-200 mg/l, time = 4 h, temperature = ambient temperature. The residual Cr (VI) concentration in the solution was analyzed spectrophotometrically at λ = 540 nm following the 1,5–diphenylcarbazide procedure. Results obtained for the characterisation of the adsorbents were similar and comparable with what obtained in literatures. Physico - chemical analysis revealed a high ash content of 89% and silica content of 95.83%. XRD analysis for the rice husk ash samples reflected the presence of cristobalite (SiO2) in amorphous form and a characteristics broad peak at 2θ angle = 26.5°. FTIR analysis revealed the presence of silanol groups (Si-OH), silicic acid (Si-O-Si-OH) in the ash and Si-O-Si and Si-O) in the silica. The results of effect of time-concentration experiments of chromium ion sorption by the adsorbents revealed that Cr (VI) ion sorption was both time and initial solution concentration dependent with over 80% removal achieved within the first 30 min of contact for both adsorbents as the initial chromate concentration was increased. Kinetic modeling of the process showed up for pseudo second order, hinting on chemisorption as the mechanism of interaction.}, year = {2021} }
TY - JOUR T1 - Low-cost Rice Husk Ash and Silica for Chromium Ion Sorption from Aqueous System: Characterisation and Kinetics AU - Adelagun Ruth Olubukola Ajoke Y1 - 2021/04/29 PY - 2021 N1 - https://doi.org/10.11648/j.ajbio.20210903.11 DO - 10.11648/j.ajbio.20210903.11 T2 - American Journal of BioScience JF - American Journal of BioScience JO - American Journal of BioScience SP - 72 EP - 78 PB - Science Publishing Group SN - 2330-0167 UR - https://doi.org/10.11648/j.ajbio.20210903.11 AB - Several materials have been developed and used to remove Chromate (VI) from industrial wastewater before discharge into the environment because of its toxicity and lethality. In this study, low-cost adsorbents (rice husk ash (RHA) and silica (RHS)) were prepared from rice husks purchased locally from a rice mill industry and characterised. While the crystallinity and mineralogy of the adsorbents were analysed using powdered XRD crystallography, analysis of the physico-chemical properties was performed using standard procedures. Elemental analysis (CHN) was done using Perkin Elmer CHN elemental analyser and FTIR Spectrometer was used to determine the functional groups on the surface of the adsorbents at room temperature. The prepared samples were used as adsorbents for the removal of chromate (VI) ion in a batch sorption process with reaction conditions vis–a-viz adsorbent dosage = 0.5 g, adsorbate volume = 500 ml, adsorbate solution concentrations: 10-200 mg/l, time = 4 h, temperature = ambient temperature. The residual Cr (VI) concentration in the solution was analyzed spectrophotometrically at λ = 540 nm following the 1,5–diphenylcarbazide procedure. Results obtained for the characterisation of the adsorbents were similar and comparable with what obtained in literatures. Physico - chemical analysis revealed a high ash content of 89% and silica content of 95.83%. XRD analysis for the rice husk ash samples reflected the presence of cristobalite (SiO2) in amorphous form and a characteristics broad peak at 2θ angle = 26.5°. FTIR analysis revealed the presence of silanol groups (Si-OH), silicic acid (Si-O-Si-OH) in the ash and Si-O-Si and Si-O) in the silica. The results of effect of time-concentration experiments of chromium ion sorption by the adsorbents revealed that Cr (VI) ion sorption was both time and initial solution concentration dependent with over 80% removal achieved within the first 30 min of contact for both adsorbents as the initial chromate concentration was increased. Kinetic modeling of the process showed up for pseudo second order, hinting on chemisorption as the mechanism of interaction. VL - 9 IS - 3 ER -